Washington contractor registration: the bond, the insurance and the steps L&I requires
Washington does not license most builders — it registers them. The process is short if you do it in the right order, and it stalls for one reason more than any other: a business name that does not match across the bond, the policy and the application.
The short answer
To work as a contractor in Washington you register with the Department of Labor & Industries. You need a business license and UBI, a surety bond of $30,000 as a general contractor or $15,000 as a specialty contractor, a general liability policy and a notarized application. The fee is $150.20.
The liability minimum is $200,000 of public liability and $50,000 of property damage, or a $250,000 combined single limit, with L&I named as certificate holder. The bond and the policy must carry your exact business name. Registration lasts two years and renews for the same fee.
Skipping it is expensive. Each day and each jobsite without registration is a separate infraction, and an unregistered contractor cannot sue to collect payment for the work. Gutter cleaning, pruning, lawn care and window washing are the exceptions that do not need it.
Washington State Department of Labor & Industries — Register as a Contractor
Washington State Department of Labor & Industries — Register as a Contractor
Washington State Department of Labor & Industries — Register as a Contractor
Independent agency · six carriers · offices in Tacoma and Auburn
Registration, not a license
Washington's word is registration. For most construction trades there is no exam and no course: the state wants proof that you run a real business, a bond that protects your customers and insurance that pays for damage you cause. Once you have them, L&I issues your contractor number.
Registration is what lets you bid, advertise and perform work that builds, remodels, repairs or demolishes property. Without it, even the advertising is off-limits.
The trades with their own exams
Electrical, plumbing, elevator, boiler, asbestos and mobile home installation work all add education, examination and licensing requirements on top of registration. If you do any of them, contractor registration is only the first half of the paperwork.
General or specialty contractor?
It is the first decision you make and it sets the size of your bond. A general contractor can do most types of construction and hire subcontractors across several specialties. A specialty contractor can only work in the specialty they registered for, and cannot hire subcontractors at all.
| General contractor | Specialty contractor | |
|---|---|---|
| Scope | Most construction work | One registered specialty |
| Subcontractors | Yes, across specialties | No |
| Bond | $30,000 | $15,000 |
| Liability minimum | $200k + $50k, or $250k combined | $200k + $50k, or $250k combined |
Think about next year, not this month
If you paint today and expect to take on flooring or a full bathroom next year, registering as a general contractor from the start saves a second round of paperwork. Switching from general to specialty does not cut the bond right away: L&I will not let the bond amount drop for two years after the change.
The five steps, in the order that works
L&I recommends a sequence, and following it is what keeps your application from coming back in the mail. The reason is simple: the bond and the liability policy must carry your exact business name, and that name is only settled once the business itself is registered with the state.
Settle the business structure and name
Sole proprietor, partnership or LLC. An LLC or corporation files with the Secretary of State first. The name you choose here is the one that must appear, letter for letter, on the bond and the policy.
Get your UBI from the Department of Revenue
The state business license costs $50 to open and issues the UBI number that every other agency uses. City endorsements for the towns you work in are added on the same application.
Buy the surety bond
$30,000 for a general contractor, $15,000 for a specialty contractor. The state also accepts an assignment of savings in place of a bond if you would rather park the cash than pay a premium.
Buy the general liability policy
At least $200,000 public liability and $50,000 property damage, or $250,000 combined. L&I must be listed as certificate holder. What that policy does and does not cover is in general liability insurance cost in Washington.
File the application and pay $150.20
Signatures must be original and notarized. At a local L&I office staff help you complete it and notarize for whoever is present. By mail, send the original — never a copy — with the bond, the certificate and a check.
Offices in Tacoma and Auburn · Serving all of Washington · English and Spanish
What it costs to register and stay registered
The state's fees are small and published to the cent. What actually weighs is the annual cost of staying registered — the bond premium and the liability premium — and those depend on your trade, your experience and your revenue. That is why no honest single number exists.
| Item | Who charges it | Amount |
|---|---|---|
| Business license and UBI | Department of Revenue | $50 |
| Contractor registration | L&I | $150.20 every two years |
| Surety bond | Surety company | Annual premium on $30,000 or $15,000 |
| General liability | Insurance carrier | Annual premium by trade |
| Reinstatement after suspension | L&I | $70.90 |
The state minimum is a floor, not a contract
General contractors commonly ask subcontractors for higher limits than L&I's minimum and for additional insured status before they let you on site. Ask what your first contract will require before you buy, so you are not rewriting the policy a month later.
How long registration takes
It depends on how you file. Mailed applications are taking three to four weeks after L&I receives a complete packet, and the registration card arrives about two weeks after that. In person, staff at a local L&I office help you finish the application and notarize on the spot, which removes the most common delay.
How to confirm you are active
Once registration is live, your business appears in L&I's Verify a Contractor, Tradesperson, or Business tool. It is the same lookup customers and general contractors use before hiring you, so check yourself there before you tell anyone you are registered.
Renewal, and what suspends you early
The certificate is valid for two years and renews before it expires, online, by mail or in person, for the same $150.20. If nothing about the business changed, you need your contractor number, your UBI and the payment. Check that your bond and insurance show as current before you renew.
Cancellations travel fast
If the bond or the liability policy is cancelled, or a judgment against the bond goes unpaid, L&I suspends the registration and notifies you by certified mail. Reinstating means proving the fix and paying $70.90. A policy cancelled for non-payment can take you off every job you have.
What working unregistered costs you
More than the fine. Washington treats each day of unregistered work and each jobsite as a separate infraction, and it also penalizes the contractor who subcontracts to someone unregistered. The bigger loss is legal: you lose the ability to make a customer pay.
No registration, no lawsuit to collect
Under RCW 18.27.080, a contractor who was not registered when they contracted for the work cannot bring an action in a Washington court to collect payment for it. The customer who decides not to pay simply does not have to.
Work that does not need registration
L&I's guidance for homeowners lists gutter cleaning, pruning or lawn care and window washing as services that do not require registration. Anything that adds to or subtracts from real estate does, as does consulting on a project or flipping houses.
If you hire anyone
Your first employee requires a workers' compensation account with L&I, which is separate from contractor registration and is only sold by the state. How that works is on our workers' compensation page.
Where to go next
Everything we insure for a trade business is on the business insurance page. If you work in a city that licenses separately, see business insurance in Tacoma or in Seattle. When you are ready, start with a free quote.
Frequently asked questions
How much does it cost to register as a contractor in Washington?
The L&I registration fee is $150.20, and opening the business with the Department of Revenue is $50. The bond and the liability policy are separate annual premiums that depend on your trade, your experience and your revenue.
Is there a test to become a contractor in Washington?
Not for most construction trades: it is a registration, not a licensing exam. Electrical, plumbing, elevator, boiler, asbestos and mobile home installation work carry their own education, exam and license requirements on top of it.
Do handymen need to register in Washington?
If the work adds to or subtracts from real estate — repairs, remodels, installs — yes. L&I's own guidance lists gutter cleaning, pruning, lawn care and window washing as work that does not require registration.
How long does contractor registration take?
Mailed applications are taking three to four weeks after L&I receives them, and the registration card follows in about two weeks. At a local L&I office, staff help complete the application and notarize signatures on the spot.
How long is a Washington contractor registration valid?
Two years. It renews for the same $150.20, online, by mail or in person, and it is suspended early if the bond or the liability policy is cancelled.
What happens if I work without being registered?
Every day and every jobsite is a separate infraction, and so is subcontracting to an unregistered contractor. An unregistered contractor also cannot sue in Washington to collect payment for the work.

Keep reading
Sources
- Washington State Department of Labor & Industries — Register as a Contractor: the steps, bond amounts, insurance minimums, the $150.20 fee, mail timelines and the $70.90 reinstatement.
- Washington State Legislature — RCW 18.27.060: registration is valid for two years.
- Washington State Legislature — RCW 18.27.200: each day and each jobsite unregistered is a separate infraction.
- Washington State Legislature — RCW 18.27.080: registration is a prerequisite to suing for payment.
- Washington State Department of Labor & Industries — Hiring a Contractor, Remodeler, or Handyman: what work requires registration and what does not.
- Washington State Department of Revenue — Business License Application: the $50 fee to open a business.
This article is general information about insurance in the state of Washington. It is not legal advice and it is not an offer of coverage. Whether a policy covers a given loss depends on its own wording, its endorsements and its exclusions; read yours, or send it to us and we will read it with you. Anel Galicia is a licensed insurance producer in the state of Washington.